Amount tab

The Amount tab allows you to trigger one or more actions depending on the transaction amount.

Figure 1. Amount tab

To do this:

  1. Click the Enable button.
    The green bar indicates that the profile is activated.
  2. Specify a minimum and maximum amount that will allow to trigger an action.
  3. Specify the currency that applies to the defined minimum and maximum amount.
    The applied currencies must be the same otherwise the Save button will not be active.
  4. Select the action that you wish to trigger when the profile appears.
    The possible values are:
    • Raise an alert
    • Validate manually
    • Enable 3D Secure if the shop’s default 3D Secure behavior is set to “3D Secure disabled by default”
    • Disable 3D Secure if the shop’s default 3D Secure behavior is set to “3D Secure enabled by default”
    • Refuse
    If you want to define one or more other actions:
  5. Click Add.
  6. Select another action that you wish to trigger when the profile appears.
  7. Click Save at the bottom of the page.

Minimum amount limit control

It is possible to enable only a minimum amount control.

Figure 2. Minimum amount limit control

  1. Click the Enable button.
    The green bar indicates that the profile is activated.
  2. Specify a transaction amount that will allow to trigger an action if the transaction amount is lower than the specified amount.
  3. Specify the currency that applies to the defined minimum amount.
  4. Select the action that you wish to trigger when the profile appears.
    The possible values are:
    • Raise an alert
    • Validate manually
    • Enable 3D Secure if the shop’s default 3D Secure behavior is set to “3D Secure disabled by default”
    • Disable 3D Secure if the shop’s default 3D Secure behavior is set to “3D Secure enabled by default”
    • Refuse
    If you want to define one or more other actions:
  5. Click Add.
  6. Select another action that you wish to trigger when the profile appears.
  7. Click Save at the bottom of the page.

Maximum amount limit control

It is possible to enable only a maximum amount control.

Figure 3. Maximum amount limit control

  1. Click the Enable button.
    The green bar indicates that the profile is activated.
  2. Specify a transaction amount that will allow to trigger an action if the transaction amount is higher than the specified amount.
  3. Specify the currency that applies to the defined maximum amount.
  4. Select the action that you wish to trigger when the profile appears.
    The possible values are:
    • Raise an alert
    • Validate manually
    • Enable 3D Secure if the shop’s default 3D Secure behavior is set to “3D Secure disabled by default”
    • Disable 3D Secure if the shop’s default 3D Secure behavior is set to “3D Secure enabled by default”
    • Refuse
    If you want to define one or more other actions:
  5. Click Add.
  6. Select another action that you wish to trigger when the profile appears.
  7. Click Save at the bottom of the page.

Control of the amount accumulated for a payment method over a week

It is possible to enable the control of the amount accumulated over a week.

Figure 4. Control of the accumulated amount

  1. Click the Enable button.
    The green bar indicates that the profile is activated.
  2. Specify a transaction amount that will allow to trigger an action if the transaction amount reaches the specified limit.
  3. Specify the currency that applies to the accumulated amount.
  4. Select the action that you wish to trigger when the profile appears.
    The possible values are:
    • Raise an alert
    • Validate manually
    • Enable 3D Secure if the shop’s default 3D Secure behavior is set to “3D Secure disabled by default”
    • Disable 3D Secure if the shop’s default 3D Secure behavior is set to “3D Secure enabled by default”
    • Refuse
    If you want to define one or more other actions:
  5. Click Add.
  6. Select another action that you wish to trigger when the profile appears.
  7. Click Save at the bottom of the page.